News:

New registrations to the forum only by request to admin@underservice.org

Main Menu

Tesla- Kapanadze generator

Started by Romero, October 15, 2011, 09:38:14 PM

Previous topic - Next topic

energia9

#465
Quote from: dllabarre on November 13, 2012, 11:49:34 PM
Quote from: energia9 on November 13, 2012, 07:45:03 PM
any one of you have a guess how could we pressurize a little glass spark gap to that pressure? 
96.6 Psi  = 6.6 bars

We don't have to start with 96 psi.
Pavel Imris started with a much lower pressure with his first test then increased it.
im wondering how hot would this spark gap would get.
A glass tube with electrodes built in could be casted in polyester resin, and there could be a little gas inlet somewhere into the thing.
now the question how do we compress the gas into it..
?

have a feeling that just compressed air would show this effect what pavel was writing about...
i think its about pressure....
Higher the pressure the better he says.

Highway

The Moray device is online !!
A person by the name of Bruce Perreault has duplicated a Moray tube AND the receiver schematic !  And he made a transistor version of it !  How much can you wish for ??  Look here at the files.
http://tech.groups.yahoo.com/group/radiant_energy/

He even has a patent on that valve but released it to the public.
Read the last 50 message pages or so. Then you know enough.
Forget Kapanadze he has made his device in such way to fool us.
Hurry hurry hurry. We have little time left.

energia9

Quote from: Highway on November 14, 2012, 07:40:10 PM
The Moray device is online !!
A person by the name of Bruce Perreault has duplicated a Moray tube AND the receiver schematic !  And he made a transistor version of it !  How much can you wish for ??  Look here at the files.
http://tech.groups.yahoo.com/group/radiant_energy/

He even has a patent on that valve but released it to the public.
Read the last 50 message pages or so. Then you know enough.
Forget Kapanadze he has made his device in such way to fool us.
Hurry hurry hurry. We have little time left.

Magnificient.
Thank you!
i wish we have a device which powers our heaters in very cold winters without thinking how much we will pay to the greedy suppliers.

Highway

#468
Quote from: energia9 on October 21, 2012, 03:58:30 PM
I have seen videos from kapanadze where he had big gas bottles near the apparatus.
here is something that might make you think very simple.
and if kapanadze said it is so simple you would laugh then look at this!
Then the secret component is a highly pressurized spark gap. (gas or liquid)
and ionised gas, plasma is responsible for this effect.

The most lightning in in a tropic region were there is a lot of
swampgas or methaangas in the air !  Without oxigen this could work !

Highway

(by now you would see that in the radiant forum a lot of stupid people there)

If you only look for heat look for Peter Davey device. Cop of 20 !
And another Imris type here: US20050057116
Simple and promising. Keep us posted here.

energia9

#470
i did experiment with highly pressurized spark gap.  right now only with air... i cant contain the high pressures inside for a long time, i was able to go up to 14 bars  10500 torr.   double the amount pavel talked about.
but the pressure is leaking out quickly, i think the gases inside dont have enough time to ionise properly
but there is indeed difference between atmospheric pressure spark gap and very high pressure spark gap.  it needs to be researched further, it worths it..
other than air, i cant put any other pure gases inside my spark gap.

but if anyone wants to experiment along with me. 
this is how i did it.
i bought  http://www.ebay.co.uk/itm/250g-Polymorph-Thermoplastic-Friendly-Plastic-DIY-/170701280532?pt=UK_Body_Shop_Supplies_Paint&hash=item27be96d514&_uhb=1

http://www.youtube.com/watch?v=IhVuc6RNyaw
the guy holds a 250 gram package in the vid,  you really get lots of plastic for your money
its cheap and reusable for ever.! i found this plastic even tougher than ordinary plastic, very hard. good stuff!

and this:  http://www.ebay.co.uk/itm/ELECTRIC-12V-AIR-PUMP-TYRE-INFLATOR-COMPRESSOR-250-PSI-CITROEN-SM-/120886592714?pt=UK_Air_Tools_and_Compressors&hash=item1c256704ca&_uhb=1
i bought some russian type spark gaps in enclosed glass envelope  i made an inlet to the glass and covered the whole thing with thermoplastic ,   it holds nice but need to make an inlet that will not release the pressure.
the pressure is enormeus inside the tube, if i let go of the compressor head it blows off so violent..

energia9

I have got some other experiments too!
check my animation on how i see energy amplification this way
my logic tells me this. 
i even did experiments with this and it shows that it is real simple.
the output needs to be synchronised with the input energy pulses
so they combine and give a greater output at the following pulses.

http://www.miniclip.com/sketch-star/en/animation/10332859/pulse

the problems i encountered during the experiments are that a capacitor at the input and at the output will want to balance eachothers voltage out
i havent figured out yet how to make a switching circuit that will solve this problem.
i will need the output discharge the same time as the input goes in,   

Highway

If you only look for heat look for Peter Davey device. Cop of 20 !

That gives results. Why try invent something yourselve when you even cannot
replicate something existing ??

energia9

Quote from: Highway on December 07, 2012, 07:23:00 PM
If you only look for heat look for Peter Davey device. Cop of 20 !

That gives results. Why try invent something yourselve when you even cannot
replicate something existing ??

Nature is allready invented!! we just discover it.!!!!

thanks for the davey device info.  i have looked through it.
the guy plugs it into the mains outlet
this is not free energy, this is energy from the mains...
he pulls abt 2-3kw , sure that will boil water immidately
the guy dont have any knoweledge on electricity.
its misinformation
sorry

Highway

How old are you... ?  He doies NOT use a.c.  And it is compared to a heater spiral and calculated that the Davey device heats 20 times faster with the same power input.
You are not well informed but live inside yourself. Sorry to see this.

energia9

Quote from: Highway on December 10, 2012, 05:59:46 PM
How old are you... ?  He doies NOT use a.c.  And it is compared to a heater spiral and calculated that the Davey device heats 20 times faster with the same power input.
You are not well informed but live inside yourself. Sorry to see this.

ok

Romero

Info on how Kapanadze device works and how is extracting power from the ground and ambient.
Patent: US 2008/0191580

Romero

Another method that looks similar to Kapanadze or Don Smith

sinergicus

Hey...recently in france a guy named Fabrice Andr? made succesuful replication  of kapanatze generator type..he is open guy  and give informations about his device ;
Look at these videos:
http://www.youtube.com/watch?v=B6hVasVR7AI
http://library.liberaenergio.org/files/-%20Free%20Energy/Tariel%20Kapanadze%20Replicas/Fabrice%20Andre%202kW/video/Kapagen%20Components%20Explanation%20by%20Fabrice%20Andre%20at%20Refuge7%20L.mp4

On the energetic forum some guys trying  to replicate...
http://www.energeticforum.com/renewable-energy/4864-donald-smith-devices-too-good-true-328.html
I tried to contact Naudin via email and ask him to contact Andre Fabrice but my mail was rejected...

Romero

@sinergicus
Hi,
I have been trying most of these ideas but without success. I have many projects started but not finished.
For the last few months I've been  doing some repairs and redecorating my house and it feels will never end, fixing something and discovering more to be done...
I have contacted J L Naudin in the past, last time few months back and the email worked fine, just try again.( JNaudin509@aol.com )